Rain-Clik
  • Rain-Clik

Most rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that “accumulation time”, the system will unnecessarily continue to water. This can look especially bad for conservation-conscious municipalities, businesses, and residences.

Purchase Now Add to Quote Cart Get Product Sheet
  • Wiring: "normally open" or "normally closed"
  • Time to turn off irrigation system: 2 to 5 minutes
  • approx. for Quick Response
  • Time to reset Quick Response: 4 hours approx. under
  • dry, sunny conditions
  • Time to reset when fully wet: 3 days approx. under dry,
  • sunny conditions
  • UL listed, CUL (CSA), CE
  • Switch rating: 24 VAC, 3 A
  • Freeze sensor shuts system off when temperatures fall below 37˚ F (Rain/Freeze-Clik model)
  • System operating frequency: 433 MHz
  • UL listed, FCC approved, suitable for use in Australia, CUL (CSA), CE
  • Communication range up to 800 ft. line of sight (Wireless model)
  • Receiver input power: 24 VAC (from controller)