1 1/4 inch Part Circle Brass Impact Sprinkler

The sprinkler VYR-160 is a part-circle sprinkler, made of brass with 1 1/4" male connection. Its axis and springs are made of stainless steel, and their O-rings and washers in stainless steel, Teflon and special polycarbonate to withstand contact with the most aggressive fertilizers in the market.

The wide range of brass mouthpieces offer a number of possible combinations among nozzles. This sprinkler is designed to work under some flow ranges between 6200 and 28000 l / h, at pressures between 4 and 7 BAR and cover a range of between 24 and 36 meters in diameter. The main nozzle is 21 ° degree angle to the horizontal plane and the secondary 12. Their average time of rotation comes to be approximately 30 sec. / 360 (3 BAR, 4.40 x2, 40 mm).

For optimum uniformity, we recommend the use of the sprinkler heads with a spacing between lines and 18x18 metres to 37x37 metres rectangular frames, and 18x18 metres to 40x40 metres triangular frames.
 

---

Features

Features:

• Part circle agricultural impact sprinkler, high flow.
• 1 1/4" male connection.
• Made of brass and stainless steel.
• High-resistance rotating joints.
• Nozzle angles of 21º and 12º.
• Part circle mechanical system using clips that are very easy and quick to adjust.
• Used in full coverage irrigation with high flow to cover the side, corner and pivot point areas
• Special mechanical and hydraulic design for energy saving and an optimal coverage coefficient.